Related Manuals for Stone 95CMP
Summary of Contents for Stone 95CMP
- Page 1 OPERATOR MANUAL MODELS: 95CMP & 95CMPED CONCRETE MIXER A 100% employee-owned American manufacturer REVISION: B 03/2002 P/N 56380...
-
Page 3: Table Of Contents
Table of Contents 95CMP & 95CMPED FOREWORD ........................... 4 LIMITED WARRANTY ......................... 5 TECHNICAL DATA ........................6 - 8 Specifications ..........................6 Imperial Torque Chart ......................... 7 Metric Torque Chart ........................8 HEALTH & SAFETY ........................9 - 13 OPERATIONS ..........................14 - 18 Before Starting .......................... -
Page 4: Foreword
Battery S/N: _________________________________ the prevention of accidents. Location of above information: Stone Construction Equipment, Inc. is not liable for the function of the machine when 1. Information on S/N tag. used in an improper manner or for other than the intended purpose. -
Page 5: Limited Warranty
No claim will be allowed for products lost or damaged in transit. Such claims should be filed with the carrier within fifteen days. Effective September 2001. Stone Construction Equipment, Inc. Phone: 1-800-888-9926 • 1-716-229-5141 Bred Tough, Technology Born To Work. -
Page 6: Technical Data
TECHNICAL DATA Specifications Stone 95CMP & 95CMPED Mixer – Specifications 95CMP 95CMPED Dimensions Operating Wt. 837 lbs. (w/ 8 hp Honda) 875 lbs. (w/ 8 hp Honda) 380 kg 396.9 kg Batch Capacity 1 - 1 1/2 bags 1 - 1 1/2 bags... -
Page 7: Imperial Torque Chart
TECHNICAL DATA Imperial Torque Chart SAE GRADE 5 SAE GRADE 8 Coarse Thread, Zinc-Plated Coarse Thread, Zinc-Plated SIZE TORQUE SIZE TORQUE ft. lbs. ft. lbs. 1/4 - 20 (.250) 1/4 - 20 (.250) 5/16 - 18 (.3125) 5/16 - 18 (.3125) 3/8 - 16 (.375) 3/8 - 16 (.375) 7/16 - 14 (.4375) -
Page 8: Metric Torque Chart
TECHNICAL DATA Metric Torque Chart Property Class 8.8 ZINC-PLATED Coarse Thread Fine Thread SIZE ft. lbs. ft. lbs. Property Class 10.9 ZINC-PLATED Coarse Thread Fine Thread SIZE ft. lbs. ft. lbs. 1000 Property Class 12.9 ZINC-PLATED Coarse Thread Fine Thread SIZE ft. -
Page 9: Health & Safety
HEALTH & SAFETY Safety Precautions Before using this equipment, study this entire manual When warning decals are destroyed or missing, contact to become familiar with its operation. Do not allow the Manufacturer immediately at 1-800-888-9926 for untrained or unauthorized personnel, especially replacement. -
Page 10: Operations
HEALTH & SAFETY Safety Precautions USE COMMON SENSE WHEN HANDLING FUELS • Transport and handle fuel only when contained in approved safety container. • Do not smoke when refueling or during any other fuel handling operation. • Do not refuel while the engine is running or while it is still hot. •... - Page 11 HEALTH & SAFETY Safety Precautions • Never perform any work on the mixer while it is running. • Before working on the mixer, stop the engine and disconnect the spark plug wire(s) to prevent accidental starting. On electric models, disconnect the electric cord at the mixer. •...
- Page 12 HEALTH & SAFETY Safety Precautions Warning-Eye Protection Always wear splash goggles when operating mixer. • Warning-Towing Warning: Do not tow the mixer with the drum in the dump position. • Mixer may become unstable and tip over when hitting a curb, pothole, or other obstruction.
- Page 13 HEALTH & SAFETY Safety Precautions PRACTICE SAFE MAINTENANCE • Understand service procedure before doing work. Keep area clean and dry. • Never lubricate, service or adjust machine while it is moving. Keep hands, feet, and clothing from power-driven parts. Disengage all power and operate controls to relieve pressure.
-
Page 14: Before Starting
OPERATION 95CMP & 95CMPED BEFORE STARTING WARNING Mixer are shipped completely assembled and ready for operation except for installation of the safety chain. BEFORE WORKING ON MACHINE, MAKE SURE ENGINE SPARK PLUG WIRE IS SAFETY CHAIN INSTALLATION - Remove the DISCONNECTED, OR, IF ELECTRIC, THAT safety chain kit from the engine compartment. -
Page 15: To Stop The Engine/Motor
OPERATION 95CMP & 95CMPED the engine starts, adjust the throttle. Always operate With drum operating between 20 - 25 RPM's the mixer the engine at full throttle when under load. Adjust is now ready for the addition of the concrete mix. For engine speed so drum is turning between 20 - 25 RPM. -
Page 16: Capacities
OPERATION 95CMP & 95CMPED CAPACITIES Before cleaning, shut the engine or motor and 95CMP 95CMPED disconnect the spark plug wire or electric cord to prevent accidental starting. Spray the mixer with water before the mix dries to remove any accumulations. - Page 17 6. Tires in good shape and at proper inflation as follows: Tire size B78 x 13 @ 35 P.S.I. (95CMP & 95CMPED) Refer to FRAME AND DRUM ASSEMBLY and AXLE ASSEMBLY sections of the Service/Parts Manual for parts identification and location.
-
Page 18: Maintenance Schedule
MAINTENANCE 95CMP & 95CMPED MONTHLY - Grease trunnions (2) places and drum spindle (2) places. YEARLY - Repack (4) tapered roller bearings in wheel hubs and replace wheel seals. Install washer and nut. Torque to 20 ft. lbs. back off one turn, torque to 7 ft. -
Page 19: California Proposition 65 Warning
CALIFORNIA PROPOSITION 65 WARNING: Engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. - 19 -... - Page 20 The Way It Ought To Be. Stone Construction Equipment, Inc. P.O. Box 150, Honeoye, New York 14471 Phone: (800) 888-9926 Fax: 716-229-2363 e-mail: sceny@mcimail.com www: stone-equip.com A 100% employee-owned American manufacturer © 1994 Stone Construction Equipment, Inc. Printed in U.S.A.
Need help?
Do you have a question about the 95CMP and is the answer not in the manual?
Questions and answers