Table of Contents
Advertisement
Table 1. Radio Base LEDs
Power on /
Data
Charging
Charge com-
pleted
Charging +
Charge com-
pleted
Charging the Battery Pack
To charge the battery, simply insert the QuickScan reader into
the base. When the scanner is fully seated in the cradle, it will
sound a "chirp" to indicate that the cradle has detected the
scanner connection.
The LEDs on the base (shown in
cate the status of the battery.
Before using the Battery, read "Battery Safety" in
the accompanying Regulatory Addendum. Data-
logic
rechargeable battery packs to ensure maximum
NOTE
performance.
Alternatively, the battery can be charged by connecting the
reader directly to a host through the micro-USB connector
available in the bottom of the handle, as shown.
Quick Reference Guide
LED
Yellow On = Base is powered
Yellow Blinking = Base receives data and
commands from the Host or the Reader.
Red On = the Battery is charging.
Green On = the Battery is completely
charged.
Red and Green Blinking together = the
Reader is not correctly placed onto the
Base.
recommends
Connecting the Base Station
STATUS
Table 1 on page
annual
replacement
7) will indi-
of
Micro-USB
Connector
7
Advertisement
Table of Contents
