Horizontal Boring Machine Unit - Grizzly G4185 Instruction Manual

3. Install the support shelf using (6) M8-1.25 x
20 hex bolts, M8-1.25 hex nuts and M8 flat
washers. See Figure 3.
4. Attach the front panel to the top of the base
using (2) M8-1.25 x 15 hex bolts and M8-
1.25 hex nuts. See Figure 4.
Figure 4. Attach front panel.
5. Set the base on the floor.
Model G4185 Horizontal Boring Machine
Unit To Base
1. Place the horizontal boring machine on the
base using an engine hoist or get assis-
tance. See Figure 5.
Figure 5. Shows the use of lifting straps.
2. Insert small chocks of wood at four points
(two per side) on the base top edges so lift
straps can be easily removed. Tap the
chocks out once straps are removed. See
Figure 6.
Figure 6. Chock in place so lift strap can be
removed.
3. Secure the horizontal boring machine base
to the stand with (4) M8-1.25 x 20 hex bolts,
M8-1.25 hex nuts and M8 flat washers.
-11-