Unpacking; Piece Inventory - Grizzly G4185 Instruction Manual

Unpacking

The Model G4185 is shipped from the manufac-
turer in a carefully packed carton. If you discover
the machine is damaged after you've signed for
delivery, immediately call Customer Service for
advice.
When you are completely satisfied with the con-
dition of your shipment, you should inventory its
parts.
If moving this machine
up or down stairs, the
machine must be dis-
mantled and moved in
smaller
sure
structures are capable of
supporting
bined
machine parts and the
people moving them.
The G4185 represents a
heavy
pounds.
tance before beginning
assembly.
NOTICE
Save all containers and packing materials
until you are satisfied that your Model
G4185 has arrived in good condition.
Freight company adjusters will want to
inspect those materials in the event that a
freight claim must be made.
-8-
pieces. Make
floor and stair
the com-
weight of the
load at 360
Seek assis-

Piece Inventory

After all the parts have been removed from the
carton, you should have:
2 Sides
1 Front
2 Lower Stand Braces
1 Shelf/Inner Brace
Motor (Mounted On Unit)
Horizontal Boring Machine Unit
Table
Guard
Air Clamp Pedal and Guard
Miter Gauge
Hardware Bag
In the event that any parts are missing, we will be
happy to replace them. Contact our Customer
Service number for assistance. If any non-propri-
etary parts such as nuts, bolts or washers are
missing, we will be happy to replace these too, but
for the sake of expediency, these items can be
obtained at your local hardware store.
NOTICE
A full parts list and breakdown can be found
toward the end of this manual. For easier
assembly, or to identify specific parts,
please refer to the detailed illustrations at
the end of the manual.
Model G4185 Horizontal Boring Machine