Mallinckrodt Nellcor NPB-70 Service Manual page 60

Section 11: Packing For Shipment
11-2
4. Place the bagged monitor or component on the layer of packing
material and fill the box completely with packing material such
that there is at least 2 inches of packing material around all sides
of the item.
5. Seal the carton with packing tape.
6. Label carton with shipping address, return address and RMA
number.
Top padding
Plastic bag
Shipping Carton
Figure 11-1: Packing the Handheld Capnograph in
Original Packing
Handheld Capnograph
Foam padding