Removing Mounting Screws; Separating Rear And Front Covers - Mallinckrodt Nellcor NPB-70 Service Manual

2. Place the monitor on a clean, dry nonabrasive surface with the back
of the monitor facing up.
3. Remove the two bottom and two back mounting screws from the
rear panel of the monitor as shown in Figure 7-2.
Figure 7-2: Removing Mounting Screws
4. Carefully lift the rear case cover up as shown in Figure 7-3.
Figure 7-3: Separating Rear and Front Covers
Section 7: Disassembly Guide
7-3