Table of Contents
Advertisement
Section 4: Service Mode
4.3.2
Default Settings
4-8
The service technician can change two default settings (refer to Table 4-4):
• 3 Min Alert
• BTPS (body temperature, pressure, saturation)
When the 3 min Alert is ON, the unit will beep every three minutes to
remind the user that an alarm (or all alarms) are set to OFF.
When BTPS is ON, the CO
Table 4-4: Changing Default Settings
Objective
To access the Default
Settings Menu (after
accessing the Alarm
Limits Menu)
To change the setting
To access BTPS
parameter (and save
the changed setting)
To reset and return to
measuring mode
To exit service mode
and save event
messages
value is corrected for this factor.
2
Action
Response
long press
short press
short press
long press
Turn off the
monitor.
Advertisement
Table of Contents
Troubleshooting
