- Example for the Hostname: bicomsystems.com
Make sure you replace Hostname from this example with your PBXware Hostname.
Make sure DNS server is configured to automatically route registration request to a PBXware
which is actually under another domain name, example: newbicomsystems.com.
Transport
Select DNS SRV from the drop down menu.
Click on the Confirm button.
You'll have to wait sometime prior for the device to reboot. If everything is done as above
described, you should have successfully registered your phone to PBXware. Dial *123 to verify
registration.
Auto Provisioning
This chapter describes how to set UAD settings, create PBXware extension and register the
phone using DHCP or Static IP address.
The following topics are covered:
UAD Settings
Creating Extension
Registering Phone
UAD Settings
UAD settings
Login to PBXware web administration interface.
Open a new browser window and enter the IP address in order to access the PBXware web
administration login screen. Example: http://192.168.1.10.
Login to PBXware with your e-mail address and password.
UAD settings.
Navigate to Settings:UAD.
Make sure Yealink UAD is enabled. To check the UAD status click on the edit icon
corresponding to your Yealink phone.