Yealink SIP-T46S Quick Start Manual page 6

UAD settings
Navigate to Settings:UAD.
Make sure Yealink UAD is enabled. To check the UAD status click on the edit icon
corresponding to your Yealink phone.
Make sure Status is set to Active, Auto provisioning is set to No, and DHCP is set to Yes.
Click on the Save button to save changes.
Creating extension
Creating Extension
Add Extension
Navigate to Extensions. Click on Add Extension.
The standard options window will be shown below.
Select Yealink phone model from the UAD select box.
Select Location: Local or Remote.
Local is for all extensions registered on the LAN and Remote is for all extensions
registered from remote networks, WAN, Internet etc.
Click on the Next step button.
Extension values
Enter values into the required field text boxes.
REQUIRED FIELDS:
Name
Enter a name for the extension being created. Example: John Smith.
E-mail
Enter the e-mail address associated with this extension. This e-mail address will receive all
system notification messages. Example: john.smith@bicomsystems.com
Department
Department to which extension will belong to. Example: Sales.
Click on the Save button.