Requirements; Identifying Phone Model; Phone Firmware; Dhcp Server - Yealink SIP-T46S Quick Start Manual

Video tutorial explaining Auto Provisioning setup for Yealink Phone on PBXware 5.

Requirements

Identifying phone model

To start and successfully complete registration of your Yealink phone you need to know which
phone model you will setup.
From the back of each Yealink phone there are exact model information that you should check.
Although different phone models can have exactly the same requirements and installation
procedure, phone models can also have significantly different requirements and installation
procedure, so that ignorance of your own model may result in the inability to successfully set up
your phone.

Phone firmware

Make sure that your phone is loaded with appropriate firmware version,66.81.x.x.
To find out the firmware version of your Yealink phone model open a new browser window and
enter your phone IP address in order to access the phone web administration interface login
screen. Example: http://192.168.1.22.
Login to phone web administration interface with your username and password. Please note,
factory default login details are username: admin and password: admin.

DHCP server

Fully configured and operational DHCP server.

PBXware version

PBXware version 4.1.3.0
In order to find out the PBXware version:
Login to PBXware
Navigate to Settings: About.
On the top of About page is a code similar to this one PBXware Edition: Business, Release:
4.1.3.0 (387597b7), Running: 1.8.32.1-gc-b47edc45, PBXware Proxy v4.1.3 (62b7bcd),
API: 4.1, libmemcached version: 1.0.14, where Release denotes the exact version of your
PBXware.