Table of Contents
Advertisement
LAN Subsystem
The ethernet controllers support the following features:
•
10/100/1000 BASE-T IEEE 802.3 compliant
RJ-45 LAN Connector LEDs
The two LEDs are built into the RJ-45 LAN connector located on the back panel. These
LEDs indicate the status of the LAN as shown in Table 1.
Table 1: LAN LED Status
LED
LED Colour
Link
Green
Data
Green/yellow
rate
V1.0
Item
Description
A
Link/Activity LED (Green)
B
Link Speed LED (Orange/Yellow)
Figure 2: LAN Connector LED Locations
LED State
Description
Off
LAN activity is occurring.
On
LAN link is established.
Blinking
LAN activity is occurring.
10 Mb/s data rate is selected.
100 Mb/s data rate is selected.
1000 Mb/s data rate is selected.
Vig710W Motherboard Manual
10
Advertisement
Table of Contents
