Table of Contents
Advertisement
3. Once the secure Boot keys are cleared it will state 'Not Installed' as shown in
below
4. Press Esc to exit the Key provisioning Menu.
5. Select 'Secure Boot' and set the option to 'Disabled'
Once all BIOS settings have been configured press F4 key to Save and Exit the BIOS
Setup.
For Non UEFI OS support (Windows 7) secure boot keys must be set to default and secure boot
disabled. Otherwise system will not detect SATA hard disk drive under boot menu.
V1.0
Figure 37: Clear Secure Boot Keys'
Figure 38: Disabling Secure boot
Vig710W Motherboard Manual
47
Advertisement
Table of Contents
