Table of Contents
Advertisement
5. PROGRAMMING
Downloaded from
ManualsNet.com
[Usage in combination with other remote device stations]
(1) Depending on the remote device stations to be used, the program enclosed by the dotted
line 1) has two programming patterns as shown in the above and the below figures.
(To check which pattern can be used, refer to the manual for the remote device to be used.)
[System configuration]
[Corrected program]
• RX(p+1)B and RX(q+1)B are remote READY.
• RX(p+1)8 and RX(q+1)8 are initial data processing request flags.
search engine
5-10
MELSEC-A
Advertisement
Table of Contents
