Cockpit Table; Cockpit Sun Lounge (Optional); Cockpit Sunshade (Optional) - Quicksilver 675WE Owner's Manual

Table of Contents

Quicksilver 675WE — System & Component Overview and Operation

21. Cockpit Table

Your boat will come with either a plastic or an optional teak table. To install the table, first remove the

plastic cover located in the table base plate. Next, push and lock the table leg into the base plate.

Finally, place the table onto the table leg. When not in use, the table can be placed in a canvas bag

(teak table only) and stored in the forward berth, while the table leg is stored in the port cockpit seat.

Cockpit Table

Your boat may be equipped with an optional cockpit sun lounge. To convert, first remove the aft

bench seat cushion. Next, rotate the aft seat base forward 180 degrees. Finally, insert the motorwell

filler board and install the sun lounge filler cushion in place. When not in use the motorwell filler

board and sun lounge filler cushion can be stored in the forward storage area.

Cockpit Sun Lounge

Aft bench seat cushion

Aft bench seat base

If installed, an optional cockpit sunshade is available to provide protection from the sun. The cockpit

sunshade consists of a rail in the hardtop and a canvas.

Operation

At the upper corner of the hardtop (port and starboard), there is a plate with a pin that holds the

Filler board

Sun lounge filler cushion

Plastic table

Teak table

Table leg

Table base

Table of Contents