Navigation Lights - Quicksilver 675WE Owner's Manual

Quicksilver 675WE — General Information

15. Navigation Lights

Your boat comes equipped with navigation lighting for use at night or in low visibility conditions. Prior
to running at night, make sure that the all around light located on the hardtop is in the upright
position. A three position switch, located at the helm switch panel, controls the navigation lights. To
turn on the Navigation Lights, push the upper part of the switch forward. This illuminates on the port
(red), starboard (green) and all around light (white) showing other vessels that you are underway. To
turn on the Anchor Light, push the lower part of the switch down. This illuminates the all around light
(white), letting other boaters know that you are anchored at a given location.
Navigation light switch
o
360 All Around Light
(White), visible 2NM
The International Regulations for Preventing Collisions at
Sea (COLREG) and the rules of the road require that a
proper lookout be maintained at all times and observance
of right of way be respected. Always be certain to have
sufficient distance to stop or maneuver if required to avoid
collisions.
Navigation Lights "OFF"
Navigation Lights "ON"
Anchor Light "ON"
15
o
112.5 Port Navigation
Light (Red), visible 2NM
o
112.5 Stbd Navigation
Light (Green), visible 2NM