Instrumentation Package; Active Trim; Cockpit Table - Quicksilver 505 Cabin Owner's Manual

Table of Contents

Quicksilver 505CAB — System & Component Overview and Operation

8. Instrumentation Package

Depending on the type of engine installed on your boat, you will either have analog or SmartCraft

gauges installed. For boats with engines 60HP or less, analog gauges come standard. This gauge

package includes a tachometer, speedometer, fuel gauge and an engine trim gauge.

If the engine installed on your boat is larger than 60HP, the instrument package includes a

SmartCraft

tachometer and speedometer multi-gauge system. By pressing the "mode" button on

the gauge, specific information vital to the safe operation of the vessel can be displayed. Refer to your

SmartCraft

gauge owner's manual for specific information on how to get the most out of the multi-

gauge display.

9. Active Trim (optional)

Your boat may come equipped with the Active Trim system from Mercury. Active Trim automatically

adjusts the engine trim based on boat speed to optimize performance and fuel economy. The system

allows for the owner to either use the default system programmed, or create their own trim profile.

At anytime the user can override the automatic trim system by simply pressing the trim button on the

shifter.

The Active Trim keypad is located on the port side of the dash. Refer to the manufacturer's manual for

complete instructions and warranty.

On your boat, a cockpit table is available for entertaining. This table and table leg are removable and

can be stored in brackets inside the forward cabin area. To install the table, first remove the plastic

cover located in the table base plate. Next, screw and lock the table leg into the base plate. Finally,

screw the table onto the table leg.

On/resume button

Off button

Profile selection

Active trim keypad

Table of Contents