Cockpit Table; Interior Cabin Filler (Optional); Back Bench Filler Seat (Optional) - Quicksilver 455 Cabin Owner's Manual

Table of Contents

Quicksilver 455CAB — System & Component Overview and Operation

8. Cockpit Table

On your boat, a cockpit table is available for entertaining. This table and table leg are removable and

can be stored in brackets inside the forward cabin area. To install the table, first remove the plastic

cover located in the table base plate. Next, screw and lock the table leg into the base plate. Finally,

screw the table onto the table leg.

Cockpit Table

An optional interior cabin filler is available for this boat, allowing you to convert the forward V-berth

area into a full size mattress for sleeping. Simply place the filler boards in the grooved edge along the

V-berth. The boards will lock into place due to their shape. Complete the berth by placing the filler

cushions over the filler board.

Interior Cabin Filler

An optional back bench filler seat is available to increase the seating area in the cockpit by creating a

continuous back bench at the aft end of the boat. When installed, the back bench filler covers the

motorwell, however, it does not interfere with normal operation and trimming of the engine. If you

want to trim the engine to trailer position or use the boarding ladder, the seat will rotate forward.

Simply pull the upper bar on the seat frame forward and the seat will move out of the way.

Table base

Table leg

Cockpit table

Filler boards

Filler cushion

Table of Contents