Table of Contents
Advertisement
Quicksilver 605OP — General Information
Dash Switch Panel
12. Navigation Lights
Your boat comes equipped with navigation lighting for use at night or in low visibility conditions. Prior
to running at night, you must install the stern pole light into the socket located on the transom. A
three position switch, located at the helm switch panel, controls the navigation lights. To turn on the
Navigation lights, push the upper part of the switch forward. This illuminates the port (red), starboard
(green) and all around light (white) showing other vessels that you are underway. To turn on the
anchor light, push the lower part of the switch down. This illuminates the all around light (white),
letting other boaters know that you are anchored at a given location.
All around light stored in aft seat
o
360
All Around Light
(White), visible 2NM
The International Regulations for Preventing Collisions at
Sea (COLREG) and the rules of the road require that a
proper lookout be maintained at all times and observance
of right of way be respected. Always be certain to have
sufficient distance to stop or manoeuver if required to avoid
collisions.
base
Bilge pump
Anchor/ navigation light
Fresh water (optional)
9
o
112.5
Port Navigation
Light (Red), visible 2NM
o
112.5
Stbd Navigation
Light (Green), visible 2NM
Advertisement
Table of Contents
