Pkm BIC7 GK IX 4 Instruction Manual page 64

2.5 Installation of the oven
DANGER! The appliance must be connected to the mains by a
qualified professional, who is familiar with and adheres to the local
requirements and supplementary regulations of your electricity supplier.
DANGER! All electrical work must be carried out by a qualified
professional. Do not modify the energy supply. The connection must be
carried out in accordance with the current local and legal regulations.
NOTICE! Depending on model, you must connect the cable bundle of
the hob to the control panel of the oven before finally fixing the oven.
1. Turn off the energy supply (fuse box).
2. Provide an opening meeting the dimensions on the drawing below (s. fig. 2 ,
below).
3. Insert the oven into the opening and install it properly. In doing so, it is
essential to observe the instructions referring to the electrical connections
given in the chapters 2.6 E
C
ONNECTION DIAGRAM AND
OVEN AND HOB
4. The appliance must be grounded.
5. Complete the installation of the appliance and fix the oven with 4 screws (s. fig.
1, below).
LECTRICAL CONNECTION OF THE OVEN
2.7 E
.
D
IMENSIONS OF THE OVEN
LECTRICAL CONNECTION
( . 1):
FIG
64
, 2.6.1
/ C :
ONNECTION