Circuit Requirements; 110V Operation - Grizzly G0510 Instruction Manual

SECTION 3: CIRCUIT REQUIREMENTS

110V Operation

The Model G0510 Shaper motor is prewired to
operate at 110V and includes a 110V plug similar
to the illustration in Figure 1.
Under normal 110V use, the motor draws approx-
imately 10 amps. We recommend a 15 amp circuit
breaker or a 15 amp slow-blow fuse.
We recommend using a dedicated circuit, (i.e.,
the Model G0510 should provide the only draw
from that circuit). If frequent circuit failures occur
when using the shaper, contact our Service
Department or your local electrical contractor.
-6-
Figure 1. Typical 110V 3-prong plug and outlet.
NOTICE
The Model G0510 cannot be rewired for
220V operation! Attempting to do this will
void the warranty and will ruin the machine.
G0510 3⁄4 HP Shaper