Table of Contents
Advertisement
SECTION 2: INTRODUCTION
We are proud to offer the Grizzly Model G0510
Shaper. The Model G0510 is part of a growing
Grizzly family of fine woodworking machinery.
When used according to the guidelines set forth in
this manual, you can expect years of trouble-free,
enjoyable operation and proof of Grizzly's com-
mitment to customer satisfaction.
The Model G0510 is intended for home use. This
shaper incorporates a
motor with full forward/reverse capabilities. It also
operates at either 8900 RPM for maximum versa-
tility.
A number of shaper cutters for the Model G0510
are available through Grizzly. Please refer to the
Grizzly catalog or our website at www.grizzly.com
for more details.
G0510 3⁄4 HP Shaper
Read the manual before
assembly and operation.
Become familiar with
the machine and its
operation before begin-
ning any work. Serious
personal
injury
result if safety or opera-
tional information is not
understood or followed.
3
⁄
HP, 110V, single-phase
4
We are also pleased to provide this manual with
the Model G0510. It was written to guide you
through assembly, review safety considerations,
and cover general operating procedures. It repre-
sents our effort to produce the best documenta-
tion possible. If you have any comments regard-
ing this manual, please write to us at the address
below:
may
Most important, we stand behind our machines. If
you have any service questions or parts requests,
please call or write us at the location listed below.
The specifications, drawings, and photographs
illustrated in this manual represent the Model
G0510 as supplied when the manual was pre-
pared. However, owing to Grizzly's policy of con-
tinuous improvement, changes may be made at
any time with no obligation on the part of Grizzly.
For your convenience, we always keep current
Grizzly manuals available on our website at
www.grizzly.com. Any updates to your machine
will be reflected in these manuals as soon as they
are complete. Visit our site often to check for the
latest updates to this manual!
Grizzly Industrial, Inc.
C
/
Technical Documentation
O
P.O. Box 2069
Bellingham, WA 98227-2069
Grizzly Industrial, Inc.
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570) 546-9663
Fax: (800) 438-5901
E-Mail: techsupport@grizzly.com
Web Site: http://www.grizzly.com
-5-
Advertisement
Table of Contents
