Zaxnet Receive Before Transmit Time - Zaxcom ZMT User Manual

Zaxcom ZMT
ZaxNet Menu

ZaxNet Receive Before Transmit Time

RX TO TX TIME:
OFF (NORMAL RX)
ZAXNET RX TO TX:
0 SEC: TX ONLY
ZAXNET RX TO TX:
20 SEC
This menu adjusts the state of the ZaxNet transceiver. This also sets how long after boot-up up the ZMT will
search for ZaxNet time code before it begins transmitting its audio over ZaxNet for monitoring purposes.
This is so the ZMT can lock to ZaxNet time code source before the unit will send confidence audio over
ZaxNet.
Receive only mode.
The ZaxNet transceiver will only receive ZaxNet and NOT go into
transmit mode. Therefore no ZaxNet TC and/or audio will be
transmitted. This setting shuts off the ZaxNet transmitter.
Transmit only mode.
The ZaxNet transceiver will only transmit ZaxNet TC and
audio and will NOT receive wireless TC or ZaxNet
commands. This setting shuts off the ZaxNet receiver.
Receive then Transmit mode.
After boot up the ZaxNet transceiver will search for a
ZaxNet signal for the selected time so it can receive and
lock time code before it begins to transmit TC and
confidence audio.
16