Zaxnet Menu; Zaxnet Mode; Zaxnet Receive Frequency Set; Zaxnet Transmit Frequency Set - Zaxcom ZMT User Manual

Zaxcom ZMT

ZaxNet Menu

ZAXNET MENU

ZaxNet Mode

ZAXNET MODE: TX
This menu sets the mode of the ZaxNet transceiver.
OFF - The ZaxNet transceiver is disabled. The ZMT will not receive ZaxNet commands or time code and it will
•
not send any ZaxNet audio. Please note if ZaxNet mode is set to OFF the several ZaxNet menu items will not
appear.
RX - The ZaxNet transceiver will receive ZaxNet commands and time code.
•
TX - The ZaxNet transceiver will send ZaxNet confidence audio and time code. Please note that in ZHD48
•
mode the ZMT will not be able to go into transmit mode.

ZaxNet Receive Frequency Set

This menu will only appear if ZaxNet is set to receive (RX) mode
RX FREQ : 2.403 RX
SIGNAL : 28
The ZaxNet receive frequency is the frequency that the ZMT will get its wireless time code and remote control
commands on. This frequency will need to match the frequency of the corresponding ZaxNet transmitter. The
ZaxNet transmitter can be a QRX with QIFB, Nomad, TRX900CL or IFB100/200. The ZMT can also receive ZaxNet
time code from another TRX transmitter or a ZFR recorder that is transmitting ZaxNet on this frequency. Please
keep in mind that the range will be limited when receiving ZaxNet from a TRX or ZFR.
When the ZMT is receiving a valid ZaxNet signal the signal strength will be shown as well as signal strength
meter that runs vertically on the far right side of the screen.

ZaxNet Transmit Frequency Set

This menu will only appear if ZaxNet is set to transmit (TX) mode
ZAXNET TX FREQ:
2.473
The ZaxNet transmit frequency is the frequency that the ZaxNet transmitter on the ZMT will broadcast time
code and confidence audio on. Please note the ZaxNet transmitted audio is for quality control purposes and the
expected range will be less than 20 feet.
14