Motorola MBP24, MBP24-2 - Digital Audio Baby Monitor Quick Start

Setting up your Digital Audio Baby Monitor

1. Parent unit battery installation
   The rechargeable battery pack supplied should be installed so that the Parent Unit can be moved without losing the link with the Baby Unit. We recommend charging the battery pack for 16 hours before using for the first time. Only use the rechargeable battery provided (2.4V, 750mAh).
   
   Strangulation hazard.
   Children have STRANGLED in cords. Keep this cord out of the reach of children (more than 1 metre away). Do not remove the tags from the AC Adapters. Only use the AC Adapters provided.

• Open and lift the battery door up as shown in the figure. (fig.b1)
  
  
• Insert the plug of the rechargeable battery pack into the jack inside, fit the battery pack into the compartment. (fig.b2)
  
  
• Insert the catches at the top of the battery door then close the door as shown in the picture. (fig.b3)
  

2. Parent unit power supply
   

• Insert the DC plug of the power adapter into the DC jack on the side of the parent unit.
• Connect the other end of the power adapter to a suitable mains power socket,
• The parent unit will turn on.
  NOTE
  Only use the power adapter provided (DC6V/400mA).

3. Baby unit power supply
   

Basic operation of the keys

Parent unit
	Press and hold to power on/off the parent unit.
	Press to increase speaker volume. While in a menu, press to scroll up.
	Press to decrease the speaker volume. While in a menu, press to move down the menu list.
	Press to access the main menu. While in a menu, press to access the sub-menu, or confirm the settings.
	Press to cancel settings and go back to the previous level. Press and hold for two-way talk.
Baby Unit
	Press and hold to power on/off the baby unit.

Basic explanation of the display icons

	Connection status Displays when the parent unit is linked to the baby unit. Flashes when the link between the baby unit and the parent unit is lost.
	Battery status scrolls when battery is charging. displays when battery is fully charged. displays when battery is low and needs charging. displays when battery is empty and needs charging.
	Sound Alert Displays when sound alert is ON. Flashes when sound alert is triggered.
	Volume off Displays when speaker volume is turned off.