Table of Contents
Advertisement
Screw
STEP 4: Place Lamps in position in firebox. Attach to fireplace with a single screw at the locations shown above for
each unit. Replace burner tube and false bottom, along with pilot shield.
STEP 5: Flip False Bottom upside down. Remove Breakaway Tabs from Rear Deflector.
STEP 6: Replace Burner Tube.
STEP 7: Replace False Bottom. Ensure that rear
lights are positioned in the openings left when
Breakaway Tabs were removed in Step 5.
STEP 8: Connect switch wires
between lamp wire and
transformer (see
schematic). Connect
remaining lamp wire to
transformer.
Transformer can then
be plugged in and the
housing fastened to the
bottom of the fireplace.
Screw
Remove Tab
Junction Box
Location
(All Models)
Remove Tab
ULK64
Transformer
Screw
Valve
Screw
50
Advertisement
Table of Contents
