Konica Minolta bizhub C300i Quick Manual page 3

1
Do not use the power source voltage other than being
specified on the machine. Failure to do that could re-
sult in a fire or electrical shock.
Do not use a multiple outlet adapter to connect any
other appliances or machines.
Use of a power outlet for more than the marked current
value could result in a fire or electrical shock.
Do not use an extension cord. Use of an extension
cord could cause a fire or electric shock. If the power
cord furnished with the product is not long enough to
be plugged into a wall outlet, contact your Technical
Representative.
Do not unplug and plug in the power cord with a wet
hand, as an electrical shock could result.
Plug the power cord all the way into the power outlet.
Failure to do this could result in a fire or electrical
shock.
Make sure to ground this product. (Connect the power
cord to an electrical outlet that is equipped with a
grounding terminal.) Failure to do so and an unlikely
event of leakage could result in a fire or electrical
shock.
The outlet must be near the equipment and easily ac-
cessible. Otherwise you can not pull out the power
plug when an emergency occurs.
Do not place any objects around the power plug, as
the power plug may be difficult to pull out when an
emergency occurs.
Do not tug the power cord when unplugging. Pulling
on the power cord could damage the cord, resulting in
a fire or electrical shock.
Remove the power plug from the outlet more than one
time a year and clean the area between the plug termi-
nals. Dust that accumulates between the plug termi-
nals may cause a fire.
<Installation>
Keep this bag away from babies and children. Do not
use in cribs, beds, carriages, or playpens. The thin film
may cling to nose and mouth and prevent breathing.
This bag is not a toy.
Do not place a flower vase or other container that con-
tains water, or metal clips or other small metallic ob-
jects on this product. Spilled water or metallic objects
dropped inside the product could result in a fire, elec-
trical shock, or breakdown.
Should a piece of metal, water, or any other similar for-
eign matter get inside the product, immediately turn
OFF the power switch, unplug the power cord from the
power outlet, and then call your Technical Represent-
ative or your authorized service representative.
Make sure that the power cord is placed on a site in
which no person would step on or trip over it. Stepping
on or tripping over the power cord could heat the pow-
er cord, resulting in a fire or electric shock.
2
<If instructed to use fixing legs>
When the product has been installed, fix the product
using the fixing legs.
Not using the fixing legs could cause the product to
move or topple over.
Do not place the product in a dusty place, or a site ex-
posed to soot or steam, near a kitchen table, bath, or
a humidifier. A fire, electrical shock, or breakdown
could result.
Do not place this product on an unstable or tilted
bench, or in a location subject to a lot of vibration and
shock. It could drop or fall, causing personal injury or
mechanical breakdown.
Do not let any object plug the ventilation holes of this
product. Heat could accumulate inside the product,
resulting in a fire or malfunction.
Whenever moving this product, be sure to disconnect
the power cord and other cables. Failure to do this
could damage the cord or cable, resulting in a fire,
electrical shock, or breakdown.
When moving this product, always hold it at the loca-
tions specified in the User's Guide or other docu-
ments. If the unit is moved while held at locations other
than those specified, it may fall, causing severe per-
sonal injury.
<Using the product>
Do not modify this product, as a fire, electrical shock,
or breakdown could result. If the product employs a la-
ser, the laser beam source could cause blindness.
Do not attempt to remove the covers and panels which
have been fixed to the product. Some products have a
high-voltage part or a laser beam source inside that
could cause an electrical shock or blindness.
Do not keep using this product, if this product be-
comes inordinately hot or emits smoke, or unusual
odor or noise. Immediately turn OFF the power switch,
unplug the power cord from the power outlet, and then
call your Technical Representative or your authorized
service representative.
If you keep on using it as is, a fire or electrical shock
could result.
Do not keep using this product, if this product has
been dropped or its cover damaged. Immediately turn
OFF the power switch, unplug the power cord from the
power outlet, and then call your Technical Represent-
ative or your authorized service representative. If you
keep on using it as is, a fire or electrical shock could
result.
Do not use flammable sprays, liquids, or gases inside
or near this machine. Do not clean the inside of this
machine using a flammable gas duster. A fire or explo-
sion could result.
<If an RFID module (limited only to 13.56 MHz) for use
in inside-the-machine proximity communication or
electromagnetic induction heating (IH) technology (lim-
ited only to 20.05 kHz to 100 kHz) is being used>
This machine generates a weak magnetic field.
If you experience any unusual symptoms with your im-
plantable medical equipment (cardiac pacemaker,
etc.) while near the machine, move away from the ma-
chine and see a doctor immediately.
Please call your Technical Representative or your au-
thorized service representative if you do not under-
stand the purchased product corresponds or not.
<If a non-contact IC card reader is being used>
If you use an implantable medical equipment (cardiac
pacemaker, etc.), do not bring the IC card reader close
from the implant within 12 cm at all times.
The radio waves may affect implantable medical
equipment (cardiac pacemaker, etc.) operations.
bizhub C360i/C300i/C250i