Konica Minolta bizhub C300i Quick Manual page 54

9
Attach the Saddle Staple Cartridge.
10
Push the blue knob of the Saddle Staple Cartridge to the back.
% Check that the mark of the Saddle Staple Cartridge matches that of the Saddle Stitcher.
11
Push in the Saddle Stitcher.
12
Close the Front Door of the Finisher.
Tips
- Do not remove staples that remain in the machine. Otherwise, the stapling function will activate but no
sheets will be stapled.
NOTICE
When moving the Saddle Stitcher, be sure to only hold the handle. Otherwise, your hand or finger may get
caught in the machine.
Be sure to replace the Saddle Staple Cartridge after the relevant message has appeared. If a Saddle Staple
Cartridge is removed before the relevant message appears, it may result in a failure.
bizhub C360i/C300i/C250i
9
53