System Options; Divx; Digital Output (Audio); Qsound/Qxpander - THOMSON DTH8043E User Manual

Menus

System Options

The System Options menu in the Setup menu offers you settings to configure certain useful
functions and optimise the performances of your DVD recorder to match those of the devices
connected to it.
1.
From the main menu select the Setup line with the
2.
Select Options system with the
3.
Select a function with the
and .
OK

DivX

Selecting Divx displays the authorisation number.

Digital output (audio)

Depending on the amplifier or television (with or without integrated
decoder) connected to your DVD recorder, you will need to set the
DIGITAL AUDIO OUT
Dolby Digital, DTS or MPEG digital signals supported by the other device.
Audio output
Tick Dolby Digital or DTS if the amplifier or TV set has a Dolby Digital or
connector
DTS decoder (or both, depending on devices). MPEG must be ticked to play
a DVD disc on which the sound was recorded using MPEG standard.

QSound/Qxpander

This function provides you with virtual reproduction of the multichannel
sound of a Dolby or DTS film onto the two channels of your TV or stereo
Your television set
amplifier.The sound effects of a 5.1 system are then simulated.
keys, then confirm with
keys, confirm with
Note: the explanation of the various functions of this menu are
detailed below. The associated illustrations show the
corresponding adjustments or functions.
sockets (coaxial or optical) so that they deliver the
Note : The name and logo are registered trademarks of Qsounds Labs Inc.
Laboratories. The TruSuround
Labs Inc. laboratories.
64
keys, then confirm with
.
OK
, adjust and confirm with the
OK
® technology is used under license from SRS
.
OK
keys