System Options - THOMSON DTH-8560 User Manual

Menus

System Options

è Setup è System Options è
MENU
Note: the explanation of the various functions of this menu are detailed below. The associated illustrations
show the corresponding adjustments or functions.
DivX
Selecting Divx displays the authorisation number.
Digital output (audio)
Depending on the amplifier or television (with or without integrated
decoder) connected to your DVD recorder, you will need to set the
DIGITAL AUDIO OUT sockets (coaxial or optical) so that they deliver
the Dolby Digital, DTS or MPEG digital signals supported by the other
device.Tick Dolby Digital or DTS if the amplifier or TV set has a Dolby
Audio
Digital or DTS decoder (or both, depending on devices). MPEG must be
output socket
ticked to play a DVD disc on which the sound was recorded using MPEG
standard.
QSound/Qxpander
This function provides you with virtual reproduction of the multichannel
sound of a Dolby or DTS film onto the two channels of your TV or stereo
Your television set
amplifier.The sound effects of a 5.1 system are then simulated .
Standby mode
Your DVD recorder has an Eco Standby to reduce its power consumption
when on stand-by. Select Eco. Standby to enable this function.
Note
on the display panel. Only the record icon will flash.
AV link
Allows a television set to control your DVD recorder and download the
same channels to the same numbers during installation of channels.
Note
AV2 Input
Choose the S-Video or Video signal, depending on the device connected to
the AV2 Scart socket (usually a satellite or cable receiver), select RGB,
Scart connector
S-Video or CVBS. If you do not know the type of signal supplied by the
connected device, try each of the settings to obtain the best result.
Note
RGB: English signal colour code (Red - Green - Blue).This is best quality.
S-Video S-VHS (Y/C), signals with separate colour components and brightness. This is
average quality.
CVBS: composite video signals. This is poor quality.
The System Options menu in the Setup menu offers
you settings to configure certain useful functions and
optimise the performances of your DVD recorder to
match those of the devices connected to it.
Note: The name and logo are registered trademarks of Qsounds Labs Inc.
Laboratories. The TruSuround
Labs Inc. laboratories.
: the Eco function does not allow the display of programming warning messages
: this function is positioned by default on On.
Pour les DVD+R, +RW
: format of image signals:
.
OK
® technology is used under license from SRS
32