Table of Contents
Advertisement
Connections and initial set up
Adding a channel
If you want to set up a new channel, use the manual search procedure which will enable you to
add a channel to the ones already set-up on your DVD recorder.The channels already stored will
not be deleted. During the initial installation, if you carried out the automatic installation
described on page 6, you do not need to carry out the steps shown on 12 and 13.
1.
If the main menu is not displayed, press the
2.
Select the Setup line using the
3.
Select the Installation line using the
4.
Select the Manual Search line using the
5.
Select your country of residence using the
.
OK
A set-up window will appear.The Standard line is highlighted.
6.
Select your country's TV standard using the
7.
Select the Reception line using the
of antenna.
•
Reception through external antenna: select Antenna (Ch).
•
Cable reception: select Cable (Ca).
8.
Select the Channel line using the
9.
Press
to start the Manual search.
PR+
The search starts.When a channel is found, the picture appears in the background.The channel
number is indicated (e.g.: Ch 06).
If the channel is encoded, press
this case, plug a decoder into the blue AV2 connector of the DVD recorder.
If the picture is poor, select Fine Tuning using
10.
When the picture and sound of the channel are good, select the line Save using
and assign a channel number with
number that you have assigned to the channel.
The Channel line is once again highlighted to start a new search. Repeat the procedure from
step 9 to search for a new channel or press
MENU
or
keys, and press
or
or
or
key.
Note: the standards displayed depend on the country selected in
step 5.
FRANCE (LL') for France,
EURO BG (BGH) for Western Europe.
DKK' for Eastern Europe.
I for the United Kingdom.
or
keys, and use the
or
keys.
to display the pictogram
AV
or
or
or the
PR+
PR-
MENU
12
key.
to validate.
OK
keys, and press
OK
to validate.
keys, and press
OK
keys on the remote control, and press
key to choose the type
next to the channel number. In
and adjust with
PR+
keys. Press
number
to exit the manual set-up.
to validate.
or
PR-
.
or
,
to store the
OK
Advertisement
Table of Contents
