Table of Contents
Advertisement
Recording functions
To watch TV Programmes
1.
Turn on your television set.
2.
Turn on your DVD recorder using the
recorder is replaced by the word
• After a few seconds the main menu of the player appears on the television screen.
• Watch TV function is already selected.
3.
Press the
OK
key of the remote control or one of the
• The images of the last watched channel appear.
• Encrusted within the image is information on the channel and programme.This disappears
after several seconds.
To change channel
Change the channel with the
channel of a device connected to your DVD recorder (satellite reciever) or to view images from
a video recorder, use the
times to select one of the three connectors (
Note: where needed, see the connection diagrams on pages 14 and 15.
No. and name of the channel
selected on the DVD recorder
Current time
Note: NICAM sound is digital, compatible with analogue tv sets. It is broadcast by certain channels and
relayed by certain emmiters in some European countries. NICAM (Near Intantaneously Companded Audio
Multiplex) is also used to broadcast Dolby Surround stereophonic programmes or for simultaneous
broadcasting in two languages or for two different sounds (intended for blind and poorly sighted people).
ON/STANDBY
.
MENU
Note: turn off non used devices to avoid problems of selecting
sockets or other types.
If the main menu of the player is not displayed on the television
screen, check and/or select the Scart socket to which you
connected your DVD recorder (see page 4 - AV1 selection).
Generally the selection is carried out using the AV key on the
television set remote control.
If the THOMSON logo temporarily appears, it is because the
screen saver has been triggered ; press the
display the menu
Note: when the information banner is displayed at the top of
the screen you have the possibility of choosing an audio channel
(if this is provided by the channel) using the
remote control. To display information again, press the
key of the remote control.
- key or the remote control number keys.To select the
PR+/PR
button on the remote control or press the
AV
AV1
Indications concerning the channel sound and the selection of audio
channels. Selection is possible with the
key.The time displayed on your DVD
PR+/PR-
,
,
) to which the device is connected.
AV2
AV3
26
OK
button to
, keys on the front panel.
key on the
INFO
button several
PR+/PR-
key on the remote control.
Advertisement
Table of Contents
