System Options Menu - THOMSON DTH8005 Owner's Manual

2_DTH8005_en 9/03/04

System Options Menu

The System Options menu in the Setup menu offers you settings to configure certain useful
functions and optimise the performances of your DTH 8005 to match those of the devices
connected to it.
1.
From the main menu select the Setup line with the
2. Select Options system with the
3.
Select a function with the
and OK .
Audio output
connector
Your television set
17:21 Page 51
keys, then confirm with
keys, confirm with
Note: the explanation of the various functions of this menu are
detailed below. The associated illustrations show the
corresponding adjustments or functions.
Digital output (audio)
Depending on the amplifier or television (with or without integrated
decoder) connected to your DTH 8005, you will need to set the
AUDIO OUT sockets (coaxial or optical) so that they deliver the Dolby
Digital, DTS or MPEG digital signals supported by the other device.Tick
Dolby Digital or DTS if the amplifier or TV set has a Dolby Digital or DTS
decoder (or both, depending on devices). MPEG must be ticked to play a
DVD disc on which the sound was recorded using MPEG standard.
SRS - TruSurround
This function provides you with virtual reproduction of the multichannel
sound of a Dolby or DTS film onto the two channels of your TV or stereo
amplifier.The sound effects of a 5.1 system are then simulated.
Note : is a trademark of SRS Labs, Inc. TruSurround
incorporated under license agreement from SRS Labs, Inc.
keys, then confirm with
.
OK
OK , adjust and confirm with the
®
51
Menus
OK .
keys
DIGITAL
technology is
EN
EN