Other Problems - THOMSON DTH8043E User Manual

You can't access the selected menu, even when you press OK
• If the name of the menu appears on a transparent background, it means that the
corresponding menu or function is not available.The
menus are contextual menus: they depend on operations performed beforehand
Card
such as:
•
Disc is only accessible if there is a disc in the disc tray of your
• is only accessible once you have recorded a TV program or video sequence (from
Titles
an external device).
• Play list is only accessible with a CD.
• is only accessible once you have connected a card reader to the front USB socket
Card
and inserted a card in it.
Your DVD recorder menu disappears
• As with computers, your DVD recorder has a screen saver which replaces the fixed menu
by a mobile THOMSON logo. Press on a navigation key to bring back the fixed menu.
You can't switch channels
• Penda During the recording of a TV program (or video sequence from a connected
device), switching channels is impossible.To change channels, you have to stop the
recording completely (page 28).
In quiet moments, you hear a slight hum coming from your DVD recorder
• Your DVD recorder is equipped with a fan. It releases heat in order to ensure proper cooling.
It switches on as soon as your DVD recorder is turned on and produces a slight hum.
The TV guide (NAVICLICK) is not displayed
• Downloading may be disabled. Make sure that
• Does the channel broadcast a TV guide ? Check in the list on page 67.

Other problems

Reconfiguring your player's initial set-up
• Open the disc tray and make sure there is no disc in it. Close the disc tray. Hold down the
key of your DVD recorder, then press the
STOP
for 3 seconds, until
reappears on your display, turn off and then turn on your DVD recorder using the
button on the front.The menu displayed on-screen is the menu which
ON/STANDBY
enables you to choose your DVD recorder's display language. It confirms that all settings
made since initial installation have been deleted.The DVD recorder has been reconfigured
as it was when purchased (factory settings). Refer to page 5 of this manual to restart the
installation of your DVD recorder.
If you forget your password
• Open the player's disc tray and ensure that there is no disc on it. Close the tray.The
player menu is now displayed on the TV screen. Now press the
and hold the
STOP
that you chose for parental control is cancelled.To reallocate a code see page 62.
INIT
is displayed on the screen of your DVD recorder.When
key on the remote control unit down for 3 seconds.The password
Further information
,
Disc Video
DVD recorder.
is not ticked (page 66).
Off
ON/STANDBY
STOP
73
, , and
Music Pictures
key by holding it down
MENU
key on your player
EN
EN