Table of Contents
Advertisement
Finishing Material Thickness:
0-6 Inches Maximum
NOTICE: Remove finishing strips before firing appliance.
DECORATIVE FRONT
FINISHING MATERIAL
Figure 10.8 Inside Fit (Folio / CF)
58
FINISHING STRIP NOT USED
(See Figure 10.9 for
removal instructions)
NON-COMBUSTIBLE
FINISHING MATERIAL
FINISHING MATERIAL
Heat & Glo • 6000C-IFT, 8000C-IFT Installation Manual • 2502-980 Rev. M • 3/21
Removal of Finishing Strips
NOTICE: Remove finishing strips before firing appliance.
Remove glass frame assembly to access finishing strip
screws.
FINISHING STRIPS
FINISHING STRIPS
REMOVED
Figure 10.9 Removing Finishing Strips.
Advertisement
Table of Contents
