Heat & Glo 8000C-IFT Owner's Manual
Hide thumbs Also See for 8000C-IFT:

Advertisement

Quick Links

INSTALLER: Leave this manual with party responsible for use and operation.
OWNER: Retain this manual for future reference.
Contact your dealer with questions regarding installation, operation or service.
NOTICE: DO NOT discard this manual!
Models:
This appliance may be installed as an OEM
installation in manufactured home (USA
only) or mobile home and must be installed
in accordance with the manufacturer's
instructions and the Manufactured Home
Construction and Safety Standard, Title 24
CFR, Part 3280 in the United States, or the
Standard for Installation in Mobile Homes,
CAN/CSA Z240 MH Series, in Canada.
This appliance is only for use with the type(s)
of gas indicated on the rating plate. This
appliance is not convertible for use with other
gases, unless a certified kit is used.
In the Commonwealth of Massachusetts installation must be
performed by a licensed plumber or gas fitter.
See appliance installation manual for additional
Commonwealth of Massachusetts requirements.
Owner's Manual
Heat & Glo • 6000C-IFT, 8000C-IFT Owner's Manual • 2502-981 Rev. J • 12/20
Care and Operation
WARNING:
FIRE OR EXPLOSION HAZARD
Failure to follow safety warnings exactly
could result in serious injury, death, or
property damage.
• DO NOT store or use gasoline or other flam-
mable vapors and liquids in the vicinity of this
or any other appliance.
• What to do if you smell gas
- DO NOT try to light any appliance.
- DO NOT touch any electrical switch. DO
NOT use any phone in your building.
- Leave the building immediately.
- Immediately call your gas supplier from
a neighbor's phone. Follow the gas sup-
plier's instructions.
- If you cannot reach your gas supplier, call
the fire department.
• Installation and service must be performed
by a qualified installer, service agency, or the
gas supplier.
DANGER
A barrier designed to reduce the risk of
burns from the hot viewing glass is provided
with this appliance and must be installed for
the protection of children and other at-risk
individuals.
HOT GLASS WILL
CAUSE BURNS.
DO NOT TOUCH GLASS
UNTIL COOLED.
NEVER ALLOW CHILDREN
TO TOUCH GLASS.
1

Advertisement

Table of Contents
loading

Summary of Contents for Heat & Glo 8000C-IFT

  • Page 1 In the Commonwealth of Massachusetts installation must be performed by a licensed plumber or gas fitter. See appliance installation manual for additional Commonwealth of Massachusetts requirements. Heat & Glo • 6000C-IFT, 8000C-IFT Owner’s Manual • 2502-981 Rev. J • 12/20...
  • Page 2: Welcome

    00,000 00,000 MIN. MIN. INPUT INPUT BTUH: BTUH: 00,000 00,000 00,000 00,000 Serial Serial XXXXXXXX XXXXXXXX ORIFICE ORIFICE SIZE: SIZE: #XXXXX #XXXXX #XXXXX #XXXXX (Serie): (Serie): Heat & Glo • 6000C-IFT, 8000C-IFT Owner’s Manual • 2502-981 Rev. J • 12/20...
  • Page 3: Table Of Contents

    C. Contact Information ......31  = Contains updated information. Heat & Glo • 6000C-IFT, 8000C-IFT Owner’s Manual • 2502-981 Rev. J • 12/20...
  • Page 4: Limited Lifetime Warranty

    Firebox and heat exchanger, FlexBurn® System 3 years Lifetime (engine, inner cover, access cover and fireback) None 1 Year All purchased replacement parts Page 1 of 2 4021-645L 10/20 Heat & Glo • 6000C-IFT, 8000C-IFT Owner’s Manual • 2502-981 Rev. J • 12/20...
  • Page 5 EXPRESSED WARRANTY SPECIFIED ABOVE FOR THE APPLICABLE PRODUCT. Some States do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. Page 2 of 2 4021-645L 10/20 Heat & Glo • 6000C-IFT, 8000C-IFT Owner’s Manual • 2502-981 Rev. J • 12/20...
  • Page 6: Product Specific Information

    Hearth & Home Technologies recommends 8000C-IFT HHT Factory Trained or NFI certified professionals. (0-2000 FT) 35,000 19,000 (NG) 8000C-IFTLP (0-2000 FT) 34,000 17,000 (Propane) Heat & Glo • 6000C-IFT, 8000C-IFT Owner’s Manual • 2502-981 Rev. J • 12/20...
  • Page 7: Important Safety And Operating Information

    • Keep remote controls out of reach of children. Figure 3.1 Clear Space Requirement - All Models • Never leave children alone near a hot fireplace, whether operating or cooling down. Heat & Glo • 6000C-IFT, 8000C-IFT Owner’s Manual • 2502-981 Rev. J • 12/20...
  • Page 8: General Operating Parts

    • Conversions must be made by a qualified service technician using Hearth & Home Technologies specified and approved parts. Heat & Glo • 6000C-IFT, 8000C-IFT Owner’s Manual • 2502-981 Rev. J • 12/20...
  • Page 9 Sugges ons on how to further reduce TV temperatures: Increase “A” dimension. Increase “C” dimension, however, increasing “B” dimension beyond maximum recommended typically results in higher temperatures. Figure 3.4 Good Faith TV Guidelines Heat & Glo • 6000C-IFT, 8000C-IFT Owner’s Manual • 2502-981 Rev. J • 12/20...
  • Page 10: Before Lighting Appliance

    • Ensure that the glass is sealed and in the proper position and that the integral barrier is in place. WARNING! Risk of Fire or Asphyxiation! DO NOT op- erate fireplace with fixed glass assembly removed. Heat & Glo • 6000C-IFT, 8000C-IFT Owner’s Manual • 2502-981 Rev. J • 12/20...
  • Page 11: Lighting Instructions (Ipi)

    F. Lighting Instructions (IPI) Heat & Glo • 6000C-IFT, 8000C-IFT Owner’s Manual • 2502-981 Rev. J • 12/20...
  • Page 12: Appliance Break-In

    NOTICE! Open windows for air circulation during fire- place break-in. • Some people may be sensitive to smoke and odors. • Smoke detectors may activate. Heat & Glo • 6000C-IFT, 8000C-IFT Owner’s Manual • 2502-981 Rev. J • 12/20...
  • Page 13: Operation During A Power Outage - Intellifire Touch

    NOTICE: Some functionality will be lost when using battery backup including remote control, fan, lights, or any other 3.5 Control Cavity / Battery Pack Location auxiliary functions that require household 110-120 VAC power. Heat & Glo • 6000C-IFT, 8000C-IFT Owner’s Manual • 2502-981 Rev. J • 12/20...
  • Page 14: Detailed Component Operating Instructions

    IFT-RC400 or IFT-RC150. The wired wall care in accessing the IFT-ECM. switch is NOT available if a Power Vent is used. - Set the IFT-ECM 3-position selector switch to OFF position. Heat & Glo • 6000C-IFT, 8000C-IFT Owner’s Manual • 2502-981 Rev. J • 12/20...
  • Page 15 If desired, a fan kit may be added. Contact your dealer to order the correct fan kit. Heat management for the fan is discussed in Section 3.H. Detailed instructions are in- cluded with the fan kit. Heat & Glo • 6000C-IFT, 8000C-IFT Owner’s Manual • 2502-981 Rev. J • 12/20...
  • Page 16: Maintenance And Service

    • DO NOT strike, slam or scratch glass. • DO NOT operate fireplace with glass removed, cracked, broken or scratched. • Replace as a complete assembly. Heat & Glo • 6000C-IFT, 8000C-IFT Owner’s Manual • 2502-981 Rev. J • 12/20...
  • Page 17 • Assess condition of screen and replace as necessary. • Inspect for scratches, dents or other damage and repair as necessary. • Check that fireplace openings are not blocked. • Vacuum and dust surfaces. Heat & Glo • 6000C-IFT, 8000C-IFT Owner’s Manual • 2502-981 Rev. J • 12/20...
  • Page 18: Maintenance Tasks - Qualified Service Technician

    • Remove all foreign objects. • Verify unobstructed air circulation. Figure 4.2 IPI Pilot Flame Patterns Heat & Glo • 6000C-IFT, 8000C-IFT Owner’s Manual • 2502-981 Rev. J • 12/20...
  • Page 19 • Replace the glass assembly on the appliance. Pull out and latch the four glass assembly latches into the groove on the glass frame. • Reinstall decorative front. Heat & Glo • 6000C-IFT, 8000C-IFT Owner’s Manual • 2502-981 Rev. J • 12/20...
  • Page 20 Figure 4.3 Grate Removal Figure 4.4 Base Refractory Removal Figure 4.5 Valve Assembly Removal Heat & Glo • 6000C-IFT, 8000C-IFT Owner’s Manual • 2502-981 Rev. J • 12/20...
  • Page 21 See Figure 4.6 for burner identification chart. Notch patterns are located on bottom side of burner. NOTCH LOCATION Note: Notch location may vary by model. Propane 6000C-IFT 8000C-IFT Figure 4.6 Burner Identification Heat & Glo • 6000C-IFT, 8000C-IFT Owner’s Manual • 2502-981 Rev. J • 12/20...
  • Page 22: Frequently Asked Questions And Troubleshooting

    Installer’s Manual for this the touch. appliance. Contact your dealer for additional information regarding operation and troubleshooting. Visit www.heatnglo.com to locate a dealer. Heat & Glo • 6000C-IFT, 8000C-IFT Owner’s Manual • 2502-981 Rev. J • 12/20...
  • Page 23: Frequently Asked Questions - Intellifire Touch Controls (Optional Ift-Rc400)

    90 seconds. If this failure appliance did not start. Try again period of appliance inactivity. persists, contact dealer for service. by pressing Flame On. Gas control system failure. Heat & Glo • 6000C-IFT, 8000C-IFT Owner’s Manual • 2502-981 Rev. J • 12/20...
  • Page 24: Troubleshooting

    If open or shorted, replace valve. Check valve harness wire continuity, if open replace 6-pin harness. Pilot won’t light, there is no noise Spark coil failure. Replace ECM. or spark, 2 Red/2 Green Lockout. Heat & Glo • 6000C-IFT, 8000C-IFT Owner’s Manual • 2502-981 Rev. J • 12/20...
  • Page 25 Check Damaged pilot assembly. resistance between tip of sense rod and IFT-ECM connector, should be less than 1 ohm. Replace pilot assembly if damage is detected. Heat & Glo • 6000C-IFT, 8000C-IFT Owner’s Manual • 2502-981 Rev. J • 12/20...
  • Page 26: Reference Materials

    • Install a switch lock or a wall/remote control with child protection lockout feature. • Keep remote controls out of reach of children. See your dealer if you have questions. Heat & Glo • 6000C-IFT, 8000C-IFT Owner’s Manual • 2502-981 Rev. J • 12/20...
  • Page 27: Service Parts

    Glass Door Assembly GLA-6000G Surround Assembly 2166-019 Finishing Strips (Sold as kit only) SRVFS-6 Junction Box SRV4021-013 12/20 Additional service part numbers appear on following page. Heat & Glo • 6000C-IFT, 8000C-IFT Owner’s Manual • 2502-981 Rev. J • 12/20...
  • Page 28 Glass Door Assembly GLA-950TR Surround Assembly 2170-019 Finishing Strips (Sold as kit only) SRVFS-8 Junction Box SRV4021-013 Additional service part numbers appear on following page. 12/20 Heat & Glo • 6000C-IFT, 8000C-IFT Owner’s Manual • 2502-981 Rev. J • 12/20...
  • Page 29 **Fuse for battery pack can be sourced locally, not a warranty item. Specs are 250v, 3A fuse, 3/4” long Additional service part numbers appear on following page. Heat & Glo • 6000C-IFT, 8000C-IFT Owner’s Manual • 2502-981 Rev. J • 12/20...
  • Page 30 Conversion Kit Propane LPK-6C Conversion Kit NG NGK-8C 8000C-IFT Conversion Kit Propane LPK-8C Regulator NG NGK-DXV-50 Regulator Propane SRVLPK-DXV-50 Pilot Orifice NG SRV593-528 Pilot Orifice Propane SRV593-527 Heat & Glo • 6000C-IFT, 8000C-IFT Owner’s Manual • 2502-981 Rev. J • 12/20...
  • Page 31: Contact Information

    This product may be covered by one or more of the following patents: (United States) 6601579, 6769426, 6863064, 7077122, 7074035, 7098269, 7234932, 7258116, 7322819, 7422011, 7470729, 7726300, 8147240, 9625149 or other U.S. and foreign patents pending. 2000-945E Printed in U.S.A. - Copyright 2020 Heat & Glo • 6000C-IFT, 8000C-IFT Owner’s Manual • 2502-981 Rev. J • 12/20...

This manual is also suitable for:

6000c-iftlp6000c-ift8000c-iftlp

Table of Contents