Low voltage landscape lighting, path & area light (8 pages)
Summary of Contents for AMP Lighting ShellPro APL-3034-B-BZ
Page 1
INSTALLATION & MAINTENANCE GUIDE Low Voltage Landscape Lighting ® ShellPro Path & Area Light ® APL-3034-B-BZ Help Hotline: 1-813-978-3900 • Mon-Fri 9am-6pm (EST) w w w. a m p l i g h t i n g . c o m...
Page 2
INSTALLATION & MAINTENANCE GUIDE ShellPro Path & Area Light ® APL-3034-B-BZ Important Safety Instructions: Read Before Installation This luminaire is intended for installation in accordance with local codes and the National Electric Code (NEC). Failure to adhere to these codes and instructions may result in serious injury, property damage and void the war- ranty.
Page 3
Package Contents A. (1) Fixture Body Parts Required (Sold Separately) A. (1) Mounting Accessory B. (1) Flat Bi-Pin LED Bulb Product Dimensions 7.8” 5.75” 26.5” 23.5” customersupport@amplighting.com • 813.978.3900 –3–...
Page 4
INSTALLATION & MAINTENANCE GUIDE ShellPro Path & Area Light ® APL-3034-B-BZ Remove Lens Using a screwdriver, loosen Shade screws on the lens and remove the lens from the shade. Lens Screw Install Bulb Flat Bi-Pin Bulb Insert bulb with correct wattage Socket or GU4 Bulb and type marked on fixture label...
Page 5
INSTALLATION & MAINTENANCE GUIDE ShellPro Path & Area Light ® APL-3034-B-BZ Install Stake Determine the desired location Board for mounting the luminaire. Hammer the stake into the ground until flange of stake is flush to grade. To avoid damage to the stake, place a board on top of the stake while hammer- Stake ing.
Page 6
INSTALLATION & MAINTENANCE GUIDE ShellPro Path & Area Light ® APL-3034-B-BZ Wire Connections Fixture Wires Wire Connectors Main Supply Cable Strip two leads from fixture wires. Using two UL listed wire connectors (sold separately), connect leads from fixture wires to main supply cable leads.
Need help?
Do you have a question about the ShellPro APL-3034-B-BZ and is the answer not in the manual?
Questions and answers