Low voltage landscape lighting, path & area light (8 pages)
Summary of Contents for AMP Lighting PetalPro APl-3033-B-BZ
Page 1
INSTALLATION & MAINTENANCE GUIDE Low Voltage Landscape Lighting ® PetalPro Path & Area Light ® APl-3033-B-BZ Help Hotline: 1-813-978-3900 • Mon-Fri 9am-6pm (EST) w w w. a m p l i g h t i n g . c o m...
Page 2
INSTALLATION & MAINTENANCE GUIDE PetalPro Path & Area Light ® APL-3033-B-BZ Important Safety Instructions: Read Before Installation This luminaire is intended for installation in accordance with local codes and the National Electric Code (NEC). Failure to adhere to these codes and instructions may result in serious injury, property damage and void the war- ranty.
Page 3
Package Contents A. (1) Fixture Body Product Dimensions A. (1) Mounting Accessory B. (1) GU4 or M11 LED Bulb Product Dimensions 5” 7.5” 4.87” 4.87” 26” customersupport@amplighting.com • 813.978.3900 –3–...
Page 4
INSTALLATION & MAINTENANCE GUIDE PetalPro Path & Area Light ® APL-3033-B-BZ Remove Lens Using a screwdriver, loosen screws on the lens and remove the lens from the shade. Shade Lens Screw Install Bulb Insert bulb with correct wattage Socket and type marked on fixture label and push into place.
Page 5
INSTALLATION & MAINTENANCE GUIDE PetalPro Path & Area Light ® APL-3033-B-BZ Install Stake Determine the desired location Board for mounting the luminaire. Hammer the stake into the ground until flange of stake is flush to grade. To avoid damage to the stake, place a board on top of the stake while hammer- Stake ing.
Page 6
INSTALLATION & MAINTENANCE GUIDE PetalPro Path & Area Light ® APL-3033-B-BZ Wire Connections Fixture Wires Wire Connectors Main Supply Cable Strip two leads from fixture wires. Using two UL listed wire connectors (sold separately), connect leads from fixture wires to main supply cable leads.
Need help?
Do you have a question about the PetalPro APl-3033-B-BZ and is the answer not in the manual?
Questions and answers