Operation By Zoom Demand - Canon CN-E70-200mm T4.4 L IS KAS S Operation Manual

6-2. Operation by Zoom Demand

Zoom operation by the zoom demand can be performed by connecting the zoom demand to the lens.
Zoom/Focus Remote Connector
1. Canon Zoom Demand ZSD-300D can be connected. Shtl/Memo/RET switches become ineffective. Frame switch
functions as one-shot AF (Auto Focus) switch.
2. Attach the baseplate, which is available on the market and is suitable to the camera, to the camera securely before
mounting the camera onto the tripod when connecting the demand cable to the zoom/focus remote connector. The
demand cable might not be connected to the connector if the baseplate is not attached to the camera. For the procedure
of the baseplate attachment, refer to the operation manual of the baseplate.
1. Set the zoom operation change-over knob of the lens to
SERVO position.
2. Connect the zoom demand to the zoom/focus remote
connector.
3. Refer to the operation manual of the zoom demand for the
detailed operation.
E19