Canon CN-E70-200mm T4.4 L IS KAS S Operation Manual page 56

To the customer who purchased CN-E70-200mm T4.4 L IS KAS S
NOTE
• When using the lens with the extender, attaching the Canon lens holder LH-CS01 to the lens and fixing it to the rig (rod)
is recommended for the stable shooting.
• LH-CS01 and the hexagon socket head wrench are included in the packing box with Zoom Servo Grip ZSG-C10.
• For purchasing LH-CS01（the hexagon socket head wrench included) separately, contact your Canon dealer.
Attaching the lens holder to the lens
Lens Holder Holes
Lens Holder
Rig (rod) attaching side
1. After attachiing the extender, attach the lens holder into
the lens holder holes of the lens using the hexagon
socket head wrench.
2. Attach the lens to the camera. Refer to the operation
manual of the camera for the details of attaching the lens
to the camera.
3. Attach the rig (rod) available in the market to the lens
holder. For the procedure to attach the rig (rod) and the
lens holder, refer to the operation manual of the rig (rod).
E10