Operating Is (Image Stabilizer) Function - Canon CN-E70-200mm T4.4 L IS KAS S Operation Manual

9. Operating IS (Image Stabilizer) Function

Shaking at the time of shooting can be compensated by setting the IS (Image Stabilizer) function.
IS Switch
IS Mode Switch
1. Set the IS switch to ON position.
2. Select the mode which is suitable for your shooting
environment by switching IS mode switch.
One of 3 (A/B/C) modes can be assigned.
・Mode A：Standard mode recommended for the shooting
with the hand-carried lenses
・Mode B：Maximum image stabilization mode
recommended for the shooting with the hand-
carried lenses
IS performance of this mode is higher than
that of Mode A.
Image fluctuation after panning operation is
large due to higher IS performance.
・Mode C：Recommended mode for the shooting with the
lenses on the tripod
E23