Manage Remote Access; Set Up Remote Management - NETGEAR Orbi LBR1020 User Manual

5. Click the ERASE button.
The factory default settings are restored. The user name is admin, the password is
password, and the LAN IP address is 192.168.1.1. DHCP is enabled.

Manage remote access

You can access your router over the Internet to view or change its settings. You must
know the router's WAN IP address to use this feature.

Set up remote management

You can access your router over the Internet to view or change its settings. You must
know the router's WAN IP address to use this feature. For information about Dynamic
DNS, see Manage Dynamic DNS on page 80.
Note: Be sure to change the password for the user name admin to a secure password.
The ideal password contains no dictionary words from any language and contains
uppercase and lowercase letters, numbers, and symbols. It can be up to 30 characters.
See Change the admin password on page 105.
To set up remote management:
1. Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > Remote Management.
The Remote Management page displays.
5. Select the Turn Remote Management On check box.
6. In the Allow Remote Access By section, specify the external IP addresses to be allowed
to access the router's remote management.
Note: For enhanced security, restrict access to as few external IP addresses as is
practical.
Manage Your Network
Orbi 4GX Router Model LBR1020
119 User Manual