Enter The Pin Or Puk - NETGEAR Orbi LBR1020 User Manual

Note: The user name and password for the mobile broadband connection are not
the same as the user name and password to log in to your router.
6. If the LTE provider requires a specific PDP for the router to connect to the mobile
broadband network, select the PDP from the PDP Type menu:
• PDP-IP(IPv4). The mobile broadband network uses IPv4 only.
• PDP-IPv6. The mobile broadband network uses IPv6 only.
• PDP-IPv4v6. The mobile broadband network uses either IPv4 or IPv6.
7. If the LTE provider requires a specific authentication method for the router to connect
to the mobile broadband network, select the authentication method from the
Authentication Type menu:
• Pap. The mobile broadband network uses Password Authentication Protocol
(PAP).
• Chap. The mobile broadband network uses Challenge Handshake Authentication
Protocol (CHAP).
• MsChapV2. The mobile broadband network uses Microsoft CHAP version 2
(MS-CHAP v2).
By default, the selection from the menu is None.
8. Click the Apply button.
Your settings are saved.

Enter the PIN or PUK

Many SIM cards require a Personal Identification Number (PIN). Without the PIN, your
router might not be able to connect to the mobile broadband network. If you do not
know your PIN, contact your LTE provider.
Note: Be careful entering the SIM PIN multiple times because you can enter only a
limited number of incorrect PINs before the SIM card is blocked. The number of allowed
attempts depends on the SIM card. If the SIM card is blocked, you must enter the PIN
unlock key (PUK). If you do not know your PUK, contact your LTE provider.
To enter the PIN or PUK:
1. Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
Manage the Mobile Broadband
Connection
Orbi 4GX Router Model LBR1020
27 User Manual