Use Remote Access - NETGEAR Orbi LBR1020 User Manual

Select one of the following:
• To allow access from a single IP address on the Internet, select the Only This
Computer radio button. Enter the IP address to be allowed access.
• To allow access from a range of IP addresses on the Internet, select the IP Address
Range radio button. Enter a beginning and ending IP address to define the
allowed range.
• To allow access from any IP address on the Internet, select the Everyone radio
button.
7. Specify the port number for accessing the router.
The default port for secure HTTP (HTTPS) access is 8443. You can enter a custom
port number for the remote router access. Choose a number from 1024 to 65535,
but do not use the number of any common service port.
8. Click the Apply button.
Your settings are saved.

Use remote access

To use remote access:
1. Launch a web browser on a computer that is not on your home network.
2. Type your router's WAN IP address into your browser's address or location field
followed by a colon (:) and the default port number (8443) or custom port number.
For example, if your external address is 134.177.0.123 and you use port number
8443, enter https://134.177.0.123:8443 in your browser.
Manage Your Network
Orbi 4GX Router Model LBR1020
120 User Manual