Manage Remote Access; Set Up Remote Management - NETGEAR RAX45 User Manual

The file is uploaded to the router and the router restarts.
WARNING: Do not interrupt the restoration process.

Manage remote access

You can access your router over the Internet to view or change its settings. You must
know the router's WAN IP address to use this feature.
Note: Be sure to change the password for the user name admin to a secure password.
The ideal password contains no dictionary words from any language and contains
uppercase and lowercase letters, numbers, and symbols. It can be up to 30 characters.
See Change the admin password on page 95.

Set up remote management

To set up remote management:
1. Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > Remote Management.
The Remote Management page displays.
5. Select the Turn Remote Management On check box.
6. In the Allow Remote Access By section, specify the external IP addresses to be allowed
to access the router's remote management.
Note: For enhanced security, restrict access to as few external IP addresses as
practical.
Select one of the following:
Manage Your Router
Nighthawk AX6 6-Stream AX4300 WiFi Router
105 User Manual