Change The Internet Connection Mode To Wired Internet Only Or Mobile Broadband Only - NETGEAR Orbi LBR1020 User Manual

To set up automatic failover:
1. Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Setup > Internet Setup > Mobile Broadband Settings.
The Mobile Broadband Settings page displays.
By default, the Internet connection mode is to always use a mobile broadband
Internet connection. That is, the selection from the Internet Connection Mode menu
is Always use 3G/4G mobile connection.
5. From the Internet Connection Mode menu, select Use WAN Ethernet with mobile
as back up in case of failure.
The router uses a wired Internet connection by default and fails over to mobile
broadband only if the wired Internet connection is down.
6. Click the Apply button.
Your settings are saved.
Change the Internet connection mode to
wired Internet only or mobile broadband
only
By default, the Internet connection mode is to always use a mobile broadband Internet
connection.
If you set up a wired Internet connection (see Optional: Connect your router to a wired
modem on page ?), you can change the Internet connection mode to a wired Internet
connection only. After you do so, you can also change it back to a mobile broadband
connection only. The router can also support a wired Internet connection with automatic
failover to a mobile broadband network (see Set up automatic failover on page 22).
Manage the Mobile Broadband
Connection
Orbi 4GX Router Model LBR1020
23 User Manual