Manage Port Filtering For Outgoing Traffic - NETGEAR Orbi LBR1020 User Manual

4. Click the Sign In button.
The full Dashboard page displays.
5. Select Settings > Advanced > Port Forwarding.
The Port Forwarding table displays.
6. Select the Disable radio button.
7. Click the Submit button.
The modem resets to activate the new settings. Any devices that are connected to
the modem are disconnected when the modem resets.

Manage Port Filtering for Outgoing Traffic

Note: You can enable and manage port filtering only when the modem functions in
Router mode (see Manage Router Mode and Bridge Mode on page ?).
As an added security measure, you can specify which services and applications (for
example, HTTP, FTP, an email server) can access or are blocked from the Internet.
Before you add a service or application, first determine which port number and protocol
the service or application uses. You can usually find this information by contacting the
publisher of the service or application or searching the Internet.
The following sections provide information about managing port filtering for outgoing
traffic:
• Block Specific Services and Applications From Accessing the Internet and Allow All
Other Services and Applications on page 62
• Allow Specific Services and Applications to Access the Internet and Block All Other
Services and Applications on page 63
• View Services and Applications on the Blacklist and Remove a Service or Application
From the List on page 65
• View Services and Applications on the Whitelist and Remove a Service or Application
From the List on page 66
• Disable Port Forwarding on page 60
Secure Your Network
Orbi 4GX Router Model LBR1020
61 User Manual