Filtration & ultraviolet disinfection all in one unit (16 pages)
Summary of Contents for Puretec WH1
Page 1
User Guide WH1 / WH2 / EM1 / EM2 Whole House Water Filtration Systems For correct operation & installation, it is essential to observe these instructions. APR2020...
Page 2
‘spring fresh’ water free of impurities if maintained properly. The system is designed for mains (WH1 & WH2 Series) or Rainwater (EM1 & EM2 Series) supply but can be used in other situations. For other types of water supply please contact your local Puretec stockist or call our Puretec Customer Service Helpline.
Page 3
Introduction Guidelines and Warnings • Where line pressure exceeds recommended max pressure on housing label a pressure limiting valve must be installed. Protect the housing from water hammer. • Use on cold water line only (with water up to 52°C). For installation over 52°C please enquire as to a suitable housing.
Page 5
Maintenance Replacement Guide You can obtain replacements from your local Puretec dealer. To maintain performance, warranty and standards use genuine Puretec replacements. WH Replacements WH1-30 CB10MP1 WH1-60 CB10MP2 WH2-30 / WH2-35 PX05MP1 CB10MP1 WH2-55 / WH2-60 PX05MP2 CB10MP2 EM Replacements...
Page 7
Puretec’s discretion, including chargeable inspection and labour costs incurred. Warranty/Australia This warranty is given by Puretec Pty Ltd, ABN 44 164 806 688, 37-43 Brodie Road, Lonsdale SA 5160, telephone no. 1300 140 140 and email at sales@puretec.com.au. This warranty is provided in addition to other rights and remedies you have under law: Our goods come with guarantees which cannot be excluded under the Australian Consumer Law.
Need help?
Do you have a question about the WH1 and is the answer not in the manual?
Questions and answers