2.Heat/Cool Deadband - Carrier Infinity SYSTXCCITC-01SI Installation Instructions Manual

could be enabled by the Installer. The simultaneous heating and cooling demand
auto mode will result in higher energy usage but benefit the customer with greater
comfort.
6.3.1.2. Heat/Cool Deadband
The minimum difference enforced between heating and cooling desired
temperatures. The deadband does not change when the user changes between
Fahrenheit (_F) and Celsius (_C). Ex: A 2_ deadband will be 2_F or 2_C and does
not change with units, _F and _C. This can allow one setting to "push" the other to
maintain this difference. When the correct deadband is set, touch SAVE.
Deadband: Adjustable from 0 to 6_
S
Default = 2_
d
31
A160183