Decorative Backplate - Carrier Infinity SYSTXCCITC-01SI Installation Instructions Manual

backplate. The figure below shows the optional decorator backplate installed with
the standard backplate, described in Section 4.5.1.
NOTE: Once Infinity System Control is secured to wall with the backplate
assembly (snapped together), care must be taken not to bend or break the
interlocking tabs when removing.
4.5.1.

Decorative Backplate

Sold separately, a thin decorative backplate is available to hide any marks/screw
holes left from the previous thermostat. This decorative backplate (or beauty ring)
is used by snapping it onto the back of the mounting plate before securing the plate
to the wall.
15
A12214
A12213