Remote Pc Connection; Figure 11- Connect Remote Pc To Kvm On Ip At "Lan" Port; Figure 12- Login Screen For Kvm On Ip - NTI RACKMUX-V17-N-8USBHDU Installation Manual

Rackmount kvm drawer with built-in high density usb kvm switch and kvm on ip

Hide thumbs Also See for RACKMUX-V17-N-8USBHDU:

Table of Contents

NTI RACKMUX-V17-N-8USBHD-IP RACKMOUNT DRAWER WITH USB KVM SWITCH AND KVM ON IP

Remote PC Connection

If the KVM on IP option was purchased (RACKMUX-V17-N-8USBHDU-IP):

1. Make a connection between an available RJ45 Ethernet port on a PC and the "LAN" port on the RACKMUX switch. A five foot

patch cable and crossover adapter have been included for this purpose.

2. The default IP of the KVM on IP is 192.168.0.70. The Ethernet port on the PC must be configured with an IP of 192.168.0.xxx

where xxx is any number except 70. You may need to configure the Ethernet port network information on the PC such that it can

connect to the KVM on IP device in the USB KVM switch

Note: Connecting to the KVM on IP requires the installation of the

Java Runtime

Environment.

3. Open a browser window on the PC. Type "192.168.0.70" into the URL address block. A login prompt will appear.

4. Enter the default user name and password for the KVM on IP:

Username = super

Password =

pass

Table of Contents